Precautions For Use Of Remote Control Lawn Mower

• Please start up the equipment in the correct sequence. The wrong startup sequence maybe damages the equipment.

• When operating the remote controller, please push the forward and backward operating sticker slowly to avoid accelerating too fast and damaging the equipment.

• If you are operating for the first time, please operate at low speed and on level ground until you get used to the operation.

• When moving equipment, please check that there are no people or animals around it, and be careful about safety.

• When inspecting, servicing, adjusting, cleaning, or refueling, please turn off the engine and main power switch and perform it in a flat place.

• Before mowing, please inspect the entire work area and remove any bouncing objects such as stones, glasses, and empty cans.

• When driving on a slope, the equipment may slip off, so please do not stand directly under or near the equipment.

• Do not touch the engine, muffler, etc. as it becomes extremely hot during operation and immediately after stopping.

• Do not touch the equipment after rotating the blade, as you will be injured if your hands, feet, or clothes get caught in the rotating part.

• Do not use it in the rain.

• Do not allow the equipment and remote controller to get wet with rain, etc., as it may cause a malfunction.

• Do not use bent, deformed or damaged blades.

• To prevent accidents caused by scattered objects, please wear protective clothing, protective glasses, a protective cap, gloves, and non-slip safety shoes.

• When storing, turn off all the power switches of the equipment and remove mud and dirt adhering to the equipment.

• Be sure to follow the warnings and precautions on the label.

Any questions please feel free to contact us.